Spot-check the depth of a spread garden material

Use a few depth readings to see whether a bulk order was spread evenly.

By CalcForge ·

Method

Measure depth at a regular grid of points rather than choosing the deepest spots. Multiply the mean depth by the covered area only when each sample represents a similar patch.

Worked example

Depths of 28, 36, 42, and 54 mm average 40 mm. Over 10 m² this represents roughly 400 L.

What to check

Record individual readings, since an accurate average can hide a thin edge or a deep mound.

Use the field calculator for the rectangular footprint, then apply this guide’s method to the result.

Open the field area calculator ↗

Further reading: UC Agriculture and Natural Resources guide to beds and containers