Spot-check the depth of a spread garden material
Use a few depth readings to see whether a bulk order was spread evenly.
By CalcForge ·
Method
Measure depth at a regular grid of points rather than choosing the deepest spots. Multiply the mean depth by the covered area only when each sample represents a similar patch.
Worked example
Depths of 28, 36, 42, and 54 mm average 40 mm. Over 10 m² this represents roughly 400 L.
What to check
Record individual readings, since an accurate average can hide a thin edge or a deep mound.
Use the field calculator for the rectangular footprint, then apply this guide’s method to the result.
Open the field area calculator ↗
Further reading: UC Agriculture and Natural Resources guide to beds and containers