Rebar Lap Length Calculator - Reinforcing Bar Splice
Estimate the lap length needed to splice two reinforcing bars based on bar diameter, concrete grade, and steel grade.
Result
Enter measurements to calculate a result.
Formula
Lap length = (design stress × bar dia) ÷ (4 × bond stress factor), adjusted for tension/compression. Take the larger of calculated lap and 300 mm.
Worked examples
16 mm Fe500, M25 concrete, tension
≈ 550 mm required; use 550 mm (larger than 300 mm minimum).
20 mm Fe415, M20 concrete, compression
≈ 644 mm × 0.8 ≈ 515 mm; use 515 mm.
Questions and assumptions
Why take the larger of calculated and 300 mm?
Building codes typically impose a minimum lap length (often 300 mm) regardless of the calculated value.
Does concrete grade affect lap length?
Yes — higher concrete grade gives better bond, reducing required lap length.