Water Pump Sizing Calculator - Flow Rate & Head
Estimate required pump flow rate and total dynamic head from fixture count, building height, and pipe friction — for preliminary pump selection.
Result
Enter measurements to calculate a result.
Formula
Flow ≈ fixture units × 0.1 L/s + safety margin. Head = building height + pressure head + friction. Power = flow × head × 9.81 ÷ efficiency.
Worked examples
20 fixtures, 15 m, 1.5 bar, 3 m friction
≈ 2.2 L/s flow; ≈ 33.3 m head; ≈ 1.0 kW pump.
Questions and assumptions
Is this accurate enough to buy a pump?
No — this is a preliminary estimate. Final pump selection should be done by a qualified plumber or engineer using pump curves.
What are fixture units?
A plumbing code measure of load on the water system (e.g., 1 toilet ≈ 3–4 fixture units).